Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2021 >> ES 300h Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (A25A-FXS) - Service Information >> Camshaft Oil Control Valve >> On-Vehicle Inspection [06/2018 - ] >> Procedure

On-Vehicle Inspection [06/2018 - ]: Procedure

  1. REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY 

    Refer to REMOVAL [06/2018 - ] 

  2. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (EXHAUST CAMSHAFT TIMING GEAR BOLT ASSEMBLY) 
    1. Check the stroke of the plunger in the center of the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly).
      GTY948838Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A Type A
      *B Type B
      *a Plunger

      Standard Stroke

      2.2 mm (0.0866 in.) or more

      If the result is not as specified, replace the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly).

  3. INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY 

    Refer to INSTALLATION [06/2018 - ] 

scientia non olet · About Mike's Workshop Manuals