Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2021 >> ES 300h Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (A25A-FXS) - Service Information >> Camshaft Oil Control Solenoid >> Removal [06/2018 - ] >> Procedure

Removal [06/2018 - ]: Procedure

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 18 [06/2018 - 08/2020] , or refer to PROCEDURE - Step 18 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 18 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 18 [09/2022 - ]

  2. REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY 
    1. Disconnect the cam timing oil control solenoid assembly connector.
      GTY754315Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using an 8 mm socket wrench, remove the 2 bolts and cam timing oil control solenoid assembly from the No. 2 timing gear cover assembly.
      NOTE:

      If the cam timing oil control solenoid assembly has been struck or dropped, replace it.

  3. REMOVE O-RING 

    HINT: 

    Perform this procedure only when replacement of the O-ring is necessary.

    1. Remove the O-ring from the cam timing oil control solenoid assembly.
      NOTE:
      • When removing the O-ring, be careful not to damage the O-ring groove of the cam timing oil control solenoid assembly.
      • If the O-ring groove of the cam timing oil control solenoid assembly is damaged, replace the cam timing oil control solenoid assembly with a new one.
      GTY754922Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals