Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2019 >> LC 500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Cruise Control System - Service Information) >> Driving Support Ecu >> Installation [04/2013 - 09/2020] >> Procedure

Installation [04/2013 - 09/2020]: Procedure

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2024 Lexus IS 500, 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 500, and 2023 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL DRIVING SUPPORT ECU ASSEMBLY 
    1. Engage the guide.
    2. Install the driving support ECU assembly with the nut.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

    3. Connect the connector.
  2. INSTALL AIR DUCT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 10 [04/2013 - 06/2014] , or refer to PROCEDURE - Step 10 [06/2014 - 08/2015] , or refer to PROCEDURE - Step 10 [08/2015 - 10/2016] , or refer to PROCEDURE - Step 7 [10/2016 - 10/2017] , or refer to PROCEDURE - Step 7 [10/2017 - 09/2020]

  3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    Refer to INSTALLATION [04/2013 - 09/2020]

scientia non olet · About Mike's Workshop Manuals