Installation [09/2020 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2024 Lexus IS 500, 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 500, and 2023 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL REAR SPEED SENSOR
1. Install the rear speed sensor to the rear axle carrier sub-assembly with the bolt.
  Torque: 8.5 N.m (87 kgf/cm, 75 in.lbf)
  NOTE:
  - Keep the tip of the rear speed sensor and installation hole free of foreign matter.
  - Firmly insert the rear speed sensor body into the rear axle carrier sub-assembly before tightening the bolt.
  - After installing the rear speed sensor to the rear axle carrier sub-assembly, make sure that there is no clearance between the rear speed sensor stay and rear axle carrier sub-assembly. Also make sure that no foreign matter is stuck between the parts.
2. Connect the rear speed sensor connector to the parking brake wire assembly.
  NOTE:
  Do not twist the rear speed sensor wire harness when installing it.
INSTALL REAR WHEEL
Refer to PROCEDURE - Step 1 [09/2020 - 10/2023] , or refer to PROCEDURE - Step 2 [10/2023 - ]
CHECK FOR SPEED SENSOR SIGNAL
Refer to TEST MODE PROCEDURE [09/2020 - 11/2021] , or refer to TEST MODE PROCEDURE [11/2021 - ]