Precaution [12/2017 - 10/2020]
- INITIALIZATION NOTE:
- Before replacing the ECM, store the heavy knock history. After replacement, write the heavy knock history to the new ECM.
Refer to REGISTRATION [12/2017 - ]
- Initialize the heavy knock history after replacing the piston rings.
Refer to INITIALIZATION [12/2017 - 10/2020]
- Perform Registration (VIN registration) after replacing the ECM.
Refer to REGISTRATION [12/2017 - ]
- Perform Learning Value Reset and Idle Learning after replacing or servicing parts related to engine operation.
Refer to INITIALIZATION [12/2017 - 10/2020]
- After replacing the ECM, perform transmission compensation, reset memory (learned values) and road test.
Refer to INITIALIZATION [12/2017 - 09/2018] , or refer to INITIALIZATION [09/2018 - 10/2020]
- Before replacing the ECM, store the heavy knock history. After replacement, write the heavy knock history to the new ECM.
- WHEN USING TECHSTREAM WARNING:
Observe the following items for safety reasons:
- Before using the Techstream, read the instruction manual.
- Prevent the Techstream cable from being caught on the pedals, shift lever or steering wheel when driving with the Techstream connected to the vehicle.
- When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One drives the vehicle, and the other operates the Techstream.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTE:
After the engine switch is turned off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
Refer to PRECAUTION [12/2017 - 10/2020]