Installation [04/2013 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2024 Lexus IS 500, 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 500, and 2023 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL ACCELERATION SENSOR
1. Install the acceleration sensor with the 2 nuts.
  Torque: 8.5 N.m (87 kgf/cm, 75 in.lbf)
  NOTE:
  - Avoid any impact to the acceleration sensor.
  - Do not drop the acceleration sensor. If it is dropped, replace it with a new one.
2. Connect the connector.
3. Return the floor carpet to its original position.
INSTALL FRONT DOOR OPENING TRIM COVER LH
Refer to PROCEDURE - Step 28 [04/2013 - 08/2015] , or refer to PROCEDURE - Step 28 [08/2015 - 10/2016] , or refer to PROCEDURE - Step 28 [10/2016 - 09/2020] , or refer to PROCEDURE - Step 28 [09/2020 - ]
INSTALL FRONT DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 29 [04/2013 - 08/2015] , or refer to PROCEDURE - Step 29 [08/2015 - 10/2016] , or refer to PROCEDURE - Step 29 [10/2016 - 09/2020] , or refer to PROCEDURE - Step 29 [09/2020 - ]
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Refer to INITIALIZATION [04/2013 - 06/2014] , or refer to INITIALIZATION [06/2014 - 08/2015] , or refer to INITIALIZATION [08/2015 - 10/2016] , or refer to INITIALIZATION [10/2016 - 10/2017] , or refer to INITIALIZATION [10/2017 - 09/2020] , or refer to INITIALIZATION [09/2020 - 11/2021] , or refer to INITIALIZATION [11/2021 - 09/2022] , or refer to INITIALIZATION [09/2022 - 10/2023] , or refer to INITIALIZATION [10/2023 - ]