Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2018 >> LC 500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Cruise Control System - Service Information) >> Front Camera >> Installation [10/2016 - 09/2020] >> Procedure

Installation [10/2016 - 09/2020]: Procedure

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2024 Lexus IS 500, 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 500, and 2023 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FORWARD RECOGNITION CAMERA 
    1. When using a new forward recognition camera:
      GTY618577Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the protective film.
        NOTE:

        Do not touch the camera lens after removing the protective film.

    2. Engage the 4 guides as shown in the illustration.
      GTY673823Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not touch the camera lens.

    3. Connect the connector to install the forward recognition camera.
  2. INSTALL FORWARD RECOGNITION LATCH 
    1. Engage the 4 guides and 2 claws as shown in the illustration to install the forward recognition latch.
      GTY618575Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NO. 1 FORWARD RECOGNITION COVER 
    1. Engage the 2 clips and 2 guides as shown in the illustration to install the No. 1 forward recognition cover.
      GTY618560Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL NO. 2 FORWARD RECOGNITION COVER 
    1. Engage the 2 guides and 2 claws as indicated by the arrows, in the order shown in the illustration to install the No. 2 forward recognition cover.
      GTY618858Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. ADJUST FORWARD RECOGNITION CAMERA 
    1. If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform Forward Recognition Camera Learning.

      Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [10/2016 - 09/2020] 

scientia non olet · About Mike's Workshop Manuals