Inspection [09/2020 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2024 Lexus IS 500, 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 500, and 2023 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT PANORAMIC VIEW MONITOR SWITCH
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Panoramic View Monitor Switch)Standard Resistance
Tester Connection Switch Condition Specified Condition 5 (ECU) - 2 (E) Panoramic view monitor switch pushed Below 1 Ω Panoramic view monitor switch not pushed 10 kΩ or higher If the result is not as specified, replace the panoramic view monitor switch.
- Check that the switch illumination illuminates.
- Apply battery voltage to the panoramic view monitor switch and check that the switch illumination illuminates.
OK
Connection Specified Condition Battery positive (+) → Terminal 6 (ILL+)
Battery negative (-) → Terminal 1 (ILL-)Illuminates If the result is not as specified, replace the panoramic view monitor switch.
*a Component without harness connected
(Panoramic View Monitor Switch)
- Apply battery voltage to the panoramic view monitor switch and check that the switch illumination illuminates.
- Measure the resistance according to the value(s) in the table below.