Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2018 >> LC 500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Navigation System - Service Information) >> Multi-Display >> Disassembly [04/2013 - 10/2016] >> Procedure

Disassembly [04/2013 - 10/2016]: Procedure

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2024 Lexus IS 500, 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 500, and 2023 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT ESCUTCHEON 
    1. Remove the insulator.
      GTY646140Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 6 screws.
      GTY679916Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Make sure to place the multi-display on a clean piece of cloth when performing this step.

    3. Disengage the 10 claws and 5 guides as shown in the illustration to remove the rear escutcheon.
      GTY646167Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      If the rear escutcheon is removed, the rear cover can easily be separated from the LCD panel. Do not separate the rear cover from the LCD panel.

      GTY650317Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Rear Cover
    4. Disengage the 2 guides and 3 claws as shown in the illustration to remove the front escutcheon.
      GTY646155Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • Do not damage the LCD panel.
      • If there are any fingerprints or foreign matter on the display portion of the LCD panel, wipe them off with a soft cloth.
scientia non olet · About Mike's Workshop Manuals