Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> RX 450h Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Service Information) >> Yaw Rate And Acceleration Sensor >> Removal [10/2015 - ] >> Procedure

Removal [10/2015 - ]: Procedure

  1. REMOVE CONSOLE BOX ASSEMBLY 

    Refer to REMOVAL [10/2015 - 12/2017] Refer to REMOVAL [12/2017 - 08/2019] Refer to REMOVAL [08/2019 - ]

  2. REMOVE FRONT NO. 2 CONSOLE BOX INSERT 

    Refer to PROCEDURE - Step 39 [10/2015 - 08/2016] Refer to PROCEDURE - Step 39 [08/2016 - 12/2017] Refer to PROCEDURE - Step 39 [12/2017 - 03/2018] Refer to PROCEDURE - Step 39 [03/2018 - 08/2019] Refer to PROCEDURE - Step 36 [08/2019 - ]

  3. REMOVE YAW RATE SENSOR ASSEMBLY 
    1. Disconnect the connector from the yaw rate sensor assembly.
      GTY620570Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and yaw rate sensor assembly.
      NOTE:
      • Do not drop the yaw rate sensor assembly.
      • If the yaw rate sensor assembly is dropped, replace it with a new one.
scientia non olet · About Mike's Workshop Manuals