Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> RC 300 Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt - Service Information >> Child Restraint Seat Tether Anchor >> Installation [09/2014 - 09/2020] >> Procedure

Installation [09/2014 - 09/2020]: Procedure

  1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET 
    1. Engage the guide and install the child restraint seat tether anchor bracket with the bolt.

      Torque: 21 N.m (214 kgf/cm, 15 ft.lbf) 

  2. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER 
    1. Engage the 2 guides and 2 claws as indicated by the arrows, in the order shown in the illustration to install the child restraint seat tether anchor cover.
      Fig 1: Identifying Child Restraint Seat Tether Anchor Cover Guides/Claws Engagement Sequence
      GTY497293Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Pull back the rear seatback assembly.
scientia non olet · About Mike's Workshop Manuals