DTC C1AA0: Front Camera Module Circuit [11/2017 - 10/2022]: Procedure

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Lexus RC 350, 2022 Lexus RC 300, 2021 Lexus RC 350, 2021 Lexus RC 300, and 2020 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)

Clear the DTCs.
Refer to DTC CHECK / CLEAR [11/2017 - 10/2022]

Chassis > Front Recognition Camera > Clear DTCs
Perform the following procedure.
HINT:

If the following procedure is not performed, the previously output DTC cannot be detected.
1. Turn the engine switch on (IG) and wait 2 seconds or more.

Check for DTCs.

Refer to DTC CHECK / CLEAR [11/2017 - 10/2022]

Chassis > Front Recognition Camera > Trouble Codes

Result

Result	Proceed to
DTC C1AA0 is not output	A
DTC C1AA0 is output	B

Result:

USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2017 - 10/2018] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - 11/2019] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2019 - 09/2020] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2020 - 10/2022]

Result:

See step 2

REPLACE FORWARD RECOGNITION CAMERA

Replace the forward recognition camera.
Refer to REMOVAL [11/2017 - 10/2022]

Perform forward recognition camera adjustment.

Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [11/2017 - 10/2022]

Result

Proceed to
NEXT

Result:

END