Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> RC 300 Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (2GR-FSE) - Service Information >> Oil Level Sensor >> Installation [09/2014 - 11/2017] >> Procedure

Installation [09/2014 - 11/2017]: Procedure

  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install a new gasket to the engine oil level sensor.
    2. Install the engine oil level sensor with the 4 bolts.

      Torque: 7.0 N.m (71 kgf/cm, 62 in.lbf) 

      HINT: 

      Be sure to clean the contact surface.

    3. Connect the engine oil level sensor connector.
  2. ADD ENGINE OIL 

    See step  7 [09/2014 - 10/2015], or see step  7 [10/2015 - 11/2017]

  3. INSPECT ENGINE OIL LEVEL 

    Refer to PROCEDURE - Step 1

  4. INSPECT FOR ENGINE OIL LEAK 

    See step  8 [09/2014 - 10/2015], or see step  8 [10/2015 - 11/2017]

  5. INSTALL FRONT SUSPENSION MEMBER BRACE (for 2WD) 

    Refer to PROCEDURE - Step 113 [09/2014 - 10/2015] , or refer to PROCEDURE - Step 114 [10/2015 - 11/2017]

scientia non olet · About Mike's Workshop Manuals