Removal [09/2014 - ]: Procedure
- REMOVE FRONT SEAT ASSEMBLY RH
HINT:
Use the same procedure as for the driver seat.
Refer to REMOVAL [09/2014 - ]
- DISCONNECT FRONT SEATBACK PAD WITH COVER RH
HINT:
Use the same procedure as for the driver seat.
- REMOVE INNER NO. 1 FRONT SEAT CUSHION SHIELD RH
HINT:
Use the same procedure as for the driver seat.
- REMOVE FRONT SEAT CUSHION SHIELD RH
HINT:
Use the same procedure as for the driver seat.
- REMOVE FRONT SEAT INNER CUSHION SHIELD RH
HINT:
Use the same procedure as for the driver seat.
- REMOVE OCCUPANT DETECTION SENSOR (FRONT SEAT CUSHION PAD WITH COVER RH)
HINT:
The occupant detection sensor cannot be removed from the front seat cushion pad with cover RH as they are a unit.
- Disengage the fastener and separate the front seat airbag assembly wire harness.
Fastener - w/ Seat Heater System:
- Disconnect the connector.
- Disengage the claw to separate the connector.
- Remove the clip.
- Disengage the hook.
- Disengage the 7 hooks and remove the occupant detection sensor (front seat cushion pad with cover RH).
- Disengage the fastener and separate the front seat airbag assembly wire harness.