Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> LS 460 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Camshaft Oil Control Valve >> On-Vehicle Inspection [09/2015 - ] >> Procedure

On-Vehicle Inspection [09/2015 - ]: Procedure

  1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    1. Connect the Techstream to the DLC3.
    2. Start the engine and turn the tester on.
    3. Start and warm up the engine.
    4. Idle the engine.
    5. Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 1) or Control the VVT Exhaust Linear (Bank 2).
    6. Check the engine speed while operating the Oil Control Valve (OCV) using the tester.

      Standard

      Tester Operation Specified Condition
      0% Normal engine speed
      30% Engine idles roughly

      If the result is not as specified, check the oil control valve, oil control valve filter, wiring and camshaft timing exhaust gear.

      HINT: 

      • Control the VVT Exhaust Linear (Bank 1): Command to activate exhaust side oil control valve of bank 1.
      • Control the VVT Exhaust Linear (Bank 2): Command to activate exhaust side oil control valve of bank 2.
scientia non olet · About Mike's Workshop Manuals