Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> LS 460 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Windows / Glass - Service Information >> Front Passenger Side Power Window Switch >> Inspection [09/2015 - ] >> Procedure

Inspection [09/2015 - ]: Procedure

  1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY398269Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      2 (UP) - 5 (GND) Manual UP operation Below 1 Ω
      10 (DOWN) - 5 (GND) Manual DOWN operation Below 1 Ω
      4 (AUTO) - 5 (GND) AUTO UP / DOWN operation Below 1 Ω
      1. If the result is not as specified, replace the power window regulator switch assembly.
    2. Check that the LED illuminates.
    3. Apply battery voltage to the power window regulator switch and check that the LED illuminates.

      OK

      Measurement Condition Specified Condition
      Battery positive (+) → 8 (LED)
      Battery negative (-) → 5 (GND)      		 LED illuminates
      1. If the result is not as specified, replace the power window regulator switch assembly.
scientia non olet · About Mike's Workshop Manuals