Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> LS 460 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Rear Power Seat Control System - Diagnostics - Introduction >> Rear Power Seat Control System >> Customize Parameters [09/2015 - ] >> Procedure

Customize Parameters [09/2015 - ]: Procedure

  1. CUSTOMIZE REAR POWER SEAT CONTROL SYSTEM 
    1. Customizing Function with Techstream

      HINT: 

      The following items can be customized.

      NOTE:
      • When the customer requests a change in a function, first make sure that the function can be customized.
      • Be sure to make a note of the current settings before customizing.
      • When troubleshooting a function, first make sure that the function is set to the default setting.
      1. Connect the Techstream to the DLC3.
      2. Turn the engine switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Seat.
      5. Select the setting by referring to the table below.
        Display Default Contents Setting Relevant
        Return with Passenger Seat* Avl Function to passenger seat move when return mode. Not Avl or Avl Position control ECU RH
        • *: w/ Ottoman
scientia non olet · About Mike's Workshop Manuals