Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> LS 460 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information >> Multi-Display >> Reassembly [09/2015 - ] >> Procedure

Reassembly [09/2015 - ]: Procedure

  1. PRECAUTION 
    NOTE:
    • Do not disassemble the accessory meter assembly except when replacing the accessory meter glass.
    • When removing and installing the accessory meter glass, make sure not to touch the display panel.
    • Do not allow any dirt (fingerprints, grease, etc.) to adhere to the accessory meter glass. If the accessory meter glass is dirty, wipe it clean with a soft cloth.
  2. INSTALL ACCESSORY METER GLASS 
    1. Install the accessory meter glass.
      GTY629553Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Attach the 4 claws to install the window plate.
      GTY629549Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Wipe off any tape adhesive residue with cleaner.

    3. Install the 7 screws.
      GTY629550Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Install a new silencer.
      GTY629547Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals