Inspection [08/2015 - 08/2021]: Procedure
- INSPECT HEIGHT CONTROL SWITCH
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Switch Condition Specified Condition 14 (LO) - 9 (E) "Down" pressed Below 1 Ω "Up" pressed 10 kΩ or higher 7 (HI) - 9 (E) "Down" pressed 10 kΩ or higher "Up" pressed Below 1 Ω TEXT IN ILLUSTRATION*a Component without harness connected
(Height Control Switch)If the result is not as specified, replace the height control switch.
- Measure the resistance according to the value(s) in the table below.