Inspection [08/2015 - 08/2021]: Procedure
- INSPECT ABSORBER CONTROL SWITCH
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Switch Condition Specified Condition 9 (E) - 11 (ECU2) COMF position Below 1 Ω Normal position 10 kΩ or higher 9 (E) - 1 (ECU1) SPORT position Below 1 Ω Normal position 10 kΩ or higher TEXT IN ILLUSTRATION*a Component without harness connected
(Absorber Control Switch)If the result is not as specified, replace the absorber control switch.
- Measure the resistance according to the value(s) in the table below.