Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> GX 460 Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Service Information) >> Cruise Control Main Switch >> Removal [08/2015 - 08/2019] >> Procedure

Removal [08/2015 - 08/2019]: Procedure

  1. PRECAUTION 
    NOTE:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Refer to PRECAUTION [08/2015 - ] ).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [08/2015 - 08/2019] ).

  3. REMOVE LOWER NO. 3 STEERING WHEEL COVER 

    Refer to PROCEDURE - Step 2

  4. REMOVE LOWER NO. 2 STEERING WHEEL COVER 

    Refer to PROCEDURE - Step 3

  5. REMOVE STEERING PAD 

    Refer to PROCEDURE - Step 4

  6. REMOVE CRUISE CONTROL MAIN SWITCH 
    1. Disconnect the connector.
      GTY255314Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and switch.