Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> GS 450h Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Service Information) >> Relay >> On-Vehicle Inspection [09/2014 - ] >> Procedure

On-Vehicle Inspection [09/2014 - ]: Procedure

  1. CHECK ABS MOTOR RELAY 
    1. Remove the ABS motor relay from the No. 3 relay block.
    2. Measure the resistance according to the value(s) in the table below.
      GTY168540Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
      3 - 5 Battery voltage is applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the relay.

    3. Install the ABS motor relay.
scientia non olet · About Mike's Workshop Manuals