Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> GS 450h Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Service Information) >> Cruise Control Main Switch >> Installation [10/2015 - ] >> Procedure

Installation [10/2015 - ]: Procedure

  1. INSTALL CRUISE CONTROL MAIN SWITCH 
    1. Install the cruise control main switch with the 2 screws.

      Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf) 

    2. Connect the connector.
    3. Attach the clamp.
  2. INSTALL STEERING PAD 

    Refer to INSTALLATION [10/2015 - 09/2016] Refer to INSTALLATION [09/2016 - ]

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [10/2015 - ]

  4. CHECK SRS WARNING LIGHT 

    Refer to DIAGNOSIS SYSTEM [09/2014 - ]

  5. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH 

    Refer to PROCEDURE - Step 24

  6. INSTALL LUGGAGE COMPARTMENT FLOOR MAT 

    Refer to PROCEDURE - Step 26

scientia non olet · About Mike's Workshop Manuals