Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> GS 450h Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Service Information) >> Cruise Control Main Switch >> Installation [09/2014 - 10/2015] >> Procedure

Installation [09/2014 - 10/2015]: Procedure

  1. INSTALL CRUISE CONTROL MAIN SWITCH 
    1. Install the cruise control main switch with the 2 screws.
    2. Connect the connector.
    3. Attach the clamp.
  2. INSTALL STEERING PAD 

    Refer to PROCEDURE - Step 1

  3. INSTALL LOWER NO. 3 STEERING WHEEL COVER 

    Refer to PROCEDURE - Step 2

  4. INSTALL LOWER NO. 2 STEERING WHEEL COVER 

    Refer to PROCEDURE - Step 3

  5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See article. Refer to INITIALIZATION [09/2014 - 10/2015] ).

  6. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH 

    Refer to PROCEDURE - Step 24

  7. INSTALL LUGGAGE COMPARTMENT FLOOR MAT 

    Refer to PROCEDURE - Step 26

  8. CHECK SRS WARNING LIGHT 

    (See article. Refer to DIAGNOSIS SYSTEM [09/2014 - ] )

scientia non olet · About Mike's Workshop Manuals