Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> GS 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Control System - Service Information) >> Knock Sensor >> Removal [10/2015 - ] >> Procedure

Removal [10/2015 - ]: Procedure

WARNING: This page is about a different car, the 2019 Lexus GS 300, 2018 Lexus GS 300, 2017 Lexus GS 200t, and 2016 Lexus GS 200t. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL [10/2015 - ]

  2. REMOVE KNOCK SENSOR 
    1. Disconnect the knock sensor connector.
      GTY506725Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and knock sensor.
scientia non olet · About Mike's Workshop Manuals