Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> GS 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Lubrication System - Service Information) >> Oil Level Sensor >> Installation [10/2015 - ] >> Procedure

Installation [10/2015 - ]: Procedure

WARNING: This page is about a different car, the 2019 Lexus GS 300, 2018 Lexus GS 300, 2017 Lexus GS 200t, and 2016 Lexus GS 200t. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install a new gasket to the engine oil level sensor.
    2. Install the engine oil level sensor to the oil pan sub-assembly with the 4 bolts.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

      HINT: 

      Be sure to clean the contact surface.

    3. Connect the engine oil level sensor connector.
  2. INSTALL FRONT SUSPENSION MEMBER BRACE 

    Refer to PROCEDURE - Step 93

  3. ADD ENGINE OIL 

    See step  4

  4. INSPECT ENGINE OIL LEVEL 

    See step  5

  5. INSPECT FOR OIL LEAK 

    See step  6

scientia non olet · About Mike's Workshop Manuals