Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> GS 350 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System - Service Information >> Fuel Pressure Sensor >> Installation [10/2015 - ] >> Procedure

Installation [10/2015 - ]: Procedure

  1. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY (FUEL PRESSURE SENSOR) 

    HINT: 

    Perform "Inspection After Repairs" after replacing the fuel delivery pipe sub-assembly (fuel pressure sensor).

    Refer to INITIALIZATION [10/2015 - 09/2018] or INITIALIZATION [09/2018 - ]

    Refer to INSTALLATION [10/2015 - ] 

    NOTE:
    • Do not remove the fuel pressure sensor from the fuel delivery pipe sub-assembly.
    • If a fuel pressure sensor is removed, replace the fuel delivery pipe sub-assembly (fuel pressure sensor) with a new one.
scientia non olet · About Mike's Workshop Manuals