DTC 43: ABS Control System Malfunction [09/2014 - 10/2015]: Procedure
- CHECK ANTI-LOCK BRAKE SYSTEM
- Clear the DTCs (Refer to DTC CHECK / CLEAR [09/2014 - 10/2015] ).
- Turn the engine switch off.
- Check if an ABS DTC is output (Refer to DTC CHECK / CLEAR [09/2014 - 10/2015]
).RESULT
Result Proceed to DTC is not output A DTC is output B
Result:
B
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS
(Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2014 - 10/2015] )
Result:
A
See step 2
- CONFIRM DTC
- Clear the DTCs (Refer to DTC CHECK / CLEAR [09/2014 - 10/2015] ).
- Turn the engine switch off.
- Check if the same DTC is output (Refer to DTC CHECK / CLEAR [09/2014 - 10/2015]
).RESULT
Result Proceed to DTC is not output A DTC is output B
Result:
A
CHECK FOR INTERMITTENT PROBLEMS
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] )
Result:
B
REPLACE BRAKE ACTUATOR ASSEMBLY
(Refer to REMOVAL [09/2014 - 10/2015] )