Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> ES 350 >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System (Service Information) >> Navigation Receiver >> Installation (07/2015 -) >> Procedure

Installation (07/2015 -): Procedure

  1. INSTALL RADIO RECEIVER ASSEMBLY 
  2. INSTALL NO. 2 RADIO BRACKET 
    1. Install the No. 2 radio bracket with the 4 screws.
  3. INSTALL NO. 1 RADIO BRACKET 
    1. Install the No. 1 radio bracket with the 4 screws.
  4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET 

    Refer to PROCEDURE - Step 7

  5. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 35

  6. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY 

    Refer to PROCEDURE - Step 36

  7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH 

    Refer to PROCEDURE - Step 37

  8. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION (07/2015 -) ).

  10. REPLACED OPERATION (w/ Parking Assist Monitor System) 

    w/ Parallel Parking Assist Function: (Refer to CALIBRATION [07/2015 - 08/2016] Refer to CALIBRATION [08/2016 - ] )

    w/o Parallel Parking Assist Function: (Refer to CALIBRATION (07/2015 -) )

  11. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column) 

    Refer to PROCEDURE - Step 3

scientia non olet · About Mike's Workshop Manuals