Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> ES 300h >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Throttle Body >> On-Vehicle Inspection [07/2015 - ] >> Procedure

On-Vehicle Inspection [07/2015 - ]: Procedure

  1. CHECK THROTTLE WITH MOTOR BODY ASSEMBLY 
    1. Put the engine in inspection mode (maintenance mode) (Refer to INSPECTION MODE PROCEDURE [07/2015 - ] ).
    2. Start the engine and check that the MIL is not illuminated. After the engine is warmed up, check that the idle speed is within the specified range with the A/C switch off

      Standard

      950 to 1050 RPM

      NOTE:
      • Be sure to perform this step with all accessories off.
      • Make sure that the shift lever is in P.
    3. Perform a road test and confirm that there are no abnormalities.
scientia non olet · About Mike's Workshop Manuals