Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> CT 200h Base >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System - Service Information >> Fuel Pressure Regulator >> Installation [08/2014 - ] >> Procedure

Installation [08/2014 - ]: Procedure

  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY 
    1. Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.
    2. Install the fuel pressure regulator assembly.
  2. INSTALL FUEL PUMP 

    See step  1

  3. INSTALL FUEL SENDER GAUGE ASSEMBLY 

    See step  1

  4. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE 

    (See article. Refer to INSTALLATION [08/2014 - 06/2016] Refer to INSTALLATION [06/2016 - ] )

scientia non olet · About Mike's Workshop Manuals