Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2017 >> CT 200h Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Windows / Glass (Service Information) >> Window Defogger Wire >> Repair [08/2014 - ] >> Procedure

Repair [08/2014 - ]: Procedure

  1. REPAIR REAR WINDOW DEFOGGER WIRE (BACK DOOR GLASS) 
    GTY378812Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    TEXT IN ILLUSTRATION

    *1 Masking Tape
    *2 Repair Point
    *3 Broken Wire
    1. Clean the broken wire tips with a grease, wax and silicone remover.
    2. Place masking tape along both sides of the wire.
    3. Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).
      GTY102931Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Using a fine tip brush, apply a small amount of the agent to the wire.
    5. After a few minutes, remove the masking tape.
      NOTE:

      Do not use the rear window defogger for at least 24 hours after performing the repair.

scientia non olet · About Mike's Workshop Manuals