How To Proceed With Troubleshooting [08/2014 - ]: Procedure

Result

Result:  1

NEXT 

See step  2

1. Measure the auxiliary battery voltage with the power switch off.

   Standard Voltage

   11 to 14 V

   If the voltage is below 11 V, replace or recharge the auxiliary battery before proceeding to the next step.

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  3

Result

Result:  1

NEXT 

See step  4

Result

Result:  2

B 

USE SIMULATION METHOD TO CHECK 

(See article. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2014 - ] )

Result:  1

A 

See step  5

1. Refer to Problem Symptoms Table (See article. Refer to PROBLEM SYMPTOMS TABLE [08/2014 - ] ).

   Result

   Result	Proceed to
   Fault is not listed in Problem Symptoms Table	A
   Fault is listed in Problem Symptoms Table	B

Result:  2

B 

See step  7

Result:  1

A 

See step  6

1. Terminals of ECU (See article. Refer to TERMINALS OF ECU [08/2014 - 06/2016] Refer to TERMINALS OF ECU [06/2016 - ] ).

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  7

Result

Result:  1

NEXT 

See step  8

Result

Result:  1

NEXT 

END