Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2016 >> LS 600h >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Service Information) >> Object Recognition Ecu >> Removal [09/2015 - ] >> Procedure

Removal [09/2015 - ]: Procedure

  1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 3

  2. REMOVE BATTERY SERVICE HOLE COVER LH 

    Refer to PROCEDURE - Step 4

  3. REMOVE ROPE HOOK ASSEMBLY 

    Refer to PROCEDURE - Step 6

  4. REMOVE DECK TRIM SIDE BOARD RH 

    Refer to PROCEDURE - Step 7

  5. REMOVE REAR FLOOR FINISH PLATE 

    Refer to PROCEDURE - Step 11

  6. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 8

  7. REMOVE ROPE HOOK 

    Refer to PROCEDURE - Step 5

  8. REMOVE NO. 1 COOLER COVER 

    Refer to PROCEDURE - Step 14

  9. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER 

    Refer to PROCEDURE - Step 10

  10. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH 

    Refer to PROCEDURE - Step 13

  11. REMOVE OBJECT RECOGNITION ECU 
    GTY636886Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the 2 connectors.
    2. Remove the 2 bolts.
    3. Detach the 2 clips and remove the object recognition ECU.
      NOTE:

      Do not drop or subject the object recognition ECU to strong shocks.

scientia non olet · About Mike's Workshop Manuals