Removal [10/2015 - ]: Procedure

REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
Refer to PROCEDURE - Step 10 [10/2015 - 09/2017], or Refer to PROCEDURE - Step 10 [09/2017 - 05/2018], or Refer to PROCEDURE - Step 10 [05/2018 - ]
REMOVE FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY
Refer to PROCEDURE - Step 15 [10/2015 - 09/2017], or Refer to PROCEDURE - Step 15 [09/2017 - 05/2018], or Refer to PROCEDURE - Step 16 [05/2018 - ]
REMOVE FRONT LOWER SUSPENSION MEMBER PROTECTOR
Refer to PROCEDURE - Step 16 [10/2015 - 09/2017], or Refer to PROCEDURE - Step 16 [09/2017 - 05/2018], or Refer to PROCEDURE - Step 17 [05/2018 - ]
REMOVE NO. 2 ENGINE UNDER COVER
Refer to PROCEDURE - Step 17 [10/2015 - 09/2017], or Refer to PROCEDURE - Step 17 [09/2017 - 05/2018], or Refer to PROCEDURE - Step 18 [05/2018 - ]
DRAIN ENGINE OIL
Refer to PROCEDURE - Step 1

SEPARATE OIL COOLER TUBE

Remove the 2 bolts and separate the oil cooler tube.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE CRANK POSITION SENSOR BRACKET

Disengage the clamp.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE ENGINE OIL LEVEL SENSOR

Disconnect the engine oil level sensor connector.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the 4 bolts.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Rotate the engine oil level sensor 180° counterclockwise and remove it from the oil pan sub-assembly.

Cut off the gasket as shown in the illustration.

*a	Cutting Position
*b	Supply Part

Remove the gasket from the engine oil level sensor.
HINT:

After cutting off the portions of the gasket shown in the illustration, remove only the outer part of the gasket.