Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2016 >> GS 200t Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Lubrication System (Service Information)) >> Oil Level Sensor >> Installation [10/2015 - ] >> Procedure

Installation [10/2015 - ]: Procedure

WARNING: This page is about a different car, the 2020 Lexus GS 350, 2019 Lexus GS 350, 2018 Lexus GS 350, 2017 Lexus GS 350, and 2016 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL OIL LEVEL SENSOR BRACKET 
    1. Install the engine oil level sensor bracket.
  2. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Apply a light coat of engine oil to the O-ring of theengine oil level sensor.
    2. Install a new clip to the engine oil level sensor as shown in the illustration.
      GTY639455Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD
      *B for AWD
    3. Install the engine oil level sensor with the 2 nuts.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

  3. INSTALL OIL WITH STRAINER PIPE SUB-ASSEMBLY (for AWD) 

    See step  7 See step  7

  4. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY 

    See step  8 See step  8

  5. ADD ENGINE OIL 

    See step  5

  6. INSPECT FOR OIL LEAK 

    See step  6

  7. INSPECT ENGINE OIL LEVEL 

    Refer to PROCEDURE - Step 2

  8. INSTALL FRONT SUSPENSION MEMBER BRACE (for 2WD) 

    Refer to PROCEDURE - Step 111

  9. INSTALL ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 115

scientia non olet · About Mike's Workshop Manuals