Installation [10/2015 - ]: Procedure

1. Install a new gasket to the engine oil temperature sensor.
2. Using a 19 mm ball joint lock nut wrench, install the engine oil temperature sensor to the stiffening crankcase assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Torque Wrench Fulcrum Length

   Torque

   Specified tightening torque 

   19.6 N*m (200 kgf*cm, 14 ft.*lbf)

   HINT: 

   • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

     Refer to PRECAUTION [10/2015 - ]

   • When using ball joint lock nut wrench (fulcrum length of 150 mm (5.91 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)): 10.2 N*m (104 kgf*cm, 8 ft.*lbf)
3. Connect the engine oil temperature sensor connector.

Refer to PROCEDURE - Step 93

See step  4

Refer to PROCEDURE - Step 1

See step  6