Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2016 >> ES 300h >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Throttle Body >> Inspection [07/2015 - ] >> Procedure

Inspection [07/2015 - ]: Procedure

  1. INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY 
    1. Check that the throttle valve opens and closes smoothly.
    2. Check that there is no foreign matter accumulated around the throttle with motor body assembly.
    3. Measure the resistance according to the value(s) in the table below.
      GTY573481Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω
      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Throttle with Motor Body Assembly)

      If the result is not as specified, replace the throttle with motor body assembly.

scientia non olet · About Mike's Workshop Manuals