Installation [07/2015 - ]: Procedure

1. Apply a light coat of engine oil to a new O-ring, and install it to the camshaft timing oil control valve assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *1	New O-ring

2. Install the camshaft timing oil control valve assembly with the bolt.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   NOTE:

   • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with cylinder head cover).
   • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.
3. Connect the camshaft timing oil control valve assembly connector.

Refer to PROCEDURE - Step 84