Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2016 >> CT 200h Base >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System - Service Information >> Vacuum Sensor >> Installation [08/2014 - ] >> Procedure

Installation [08/2014 - ]: Procedure

  1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR 
    1. Install the manifold absolute pressure sensor with the bolt.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

    2. Connect the connector.
  2. INSTALL AIR CLEANER CASE 

    Refer to PROCEDURE - Step 3

  3. INSTALL INLET AIR CLEANER 

    Refer to PROCEDURE - Step 69

  4. INSTALL WATER HOSE HOSE CLAMP 

    Refer to PROCEDURE - Step 70

  5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 6

  6. INSTALL NO. 2 CYLINDER HEAD COVER 

    Refer to PROCEDURE - Step 99

scientia non olet · About Mike's Workshop Manuals