DTC C1A4A: Skid Control Buzzer Circuit [10/2014 - ]: Procedure
- PERFORM ACTIVE TEST USING TECHSTREAM (SKID CONTROL BUZZER)
- Using the Techstream, enter the following menus: Chassis / ABS/VSC/TRAC / Active Test.ABS/VSC/TRAC
Tester Display Test Part Control Range Diagnostic Note Buzzer Skid control buzzer sound ON / OFF - OK
Skid control buzzer sounds.
NG → See step 2
OK → See step 3
- Using the Techstream, enter the following menus: Chassis / ABS/VSC/TRAC / Active Test.
- GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - ]
- REPLACE DRIVING SUPPORT ECU. Refer to REMOVAL [10/2014 - ]