Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2015 >> IS 350 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (2GR-FSE) - Service Information >> Oil Level Sensor >> Installation [04/2013 - 10/2016] >> Procedure

Installation [04/2013 - 10/2016]: Procedure

  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install a new gasket to the engine oil level sensor.
    2. Install the engine oil level sensor with the 4 bolts.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

      HINT: 

      Be sure to clean the contact surface.

    3. Connect the engine oil level sensor connector.
  2. ADD ENGINE OIL 

    See step  7[04/2013 - 08/2015], or see step  7[08/2015 - 10/2017]

  3. INSPECT ENGINE OIL LEVEL 

    Refer to PROCEDURE - Step 1

  4. INSPECT FOR OIL LEAK 

    See step  8[04/2013 - 08/2015], or see step  8[08/2015 - 10/2017]

  5. INSTALL NO. 2 ENGINE UNDER COVER (w/ No. 2 Engine Under Cover) 

    Refer to PROCEDURE - Step 100 [04/2013 - 08/2015] , or refer to PROCEDURE - Step 101 [08/2015 - 10/2016]

  6. INSTALL FRONT SUSPENSION MEMBER BRACE (w/ No. 2 Engine Under Cover) 

    Refer to PROCEDURE - Step 101 [04/2013 - 08/2015] , or refer to PROCEDURE - Step 102 [08/2015 - 10/2016]

scientia non olet · About Mike's Workshop Manuals