Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2015 >> GS 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Control System - Service Information) >> Mass Air Flow Meter >> Installation [10/2015 - ] >> Procedure

Installation [10/2015 - ]: Procedure

WARNING: This page is about a different car, the 2020 Lexus GS 350, 2019 Lexus GS 350, 2018 Lexus GS 350, 2017 Lexus GS 350, and 2016 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL INTAKE MASS AIR FLOW METER SUB-ASSEMBLY 

    HINT: 

    Perform "Inspection After Repairs" after replacing the intake mass air flow meter sub-assembly. (Refer to INITIALIZATION [10/2015 - 09/2018] or refer to INITIALIZATION [09/2018 - ] )

    1. Install the intake mass air flow meter sub-assembly with the 2 screws.

      Torque: 1.0 N*m (10 kgf*cm, 9 in.*lbf) 

    2. Connect the connector to the intake mass air flow meter sub-assembly.
  2. INSTALL COOL AIR INTAKE DUCT SEAL 

    Refer to PROCEDURE - Step 117

  3. INSTALL ENGINE ROOM SIDE COVER 

    Refer to PROCEDURE - Step 118

scientia non olet · About Mike's Workshop Manuals