Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2015 >> GS 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Control System - Service Information) >> Knock Sensor >> Removal [10/2015 - ] >> Procedure

Removal [10/2015 - ]: Procedure

WARNING: This page is about a different car, the 2020 Lexus GS 350, 2019 Lexus GS 350, 2018 Lexus GS 350, 2017 Lexus GS 350, and 2016 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FUEL DELIVERY PIPE 

    Refer to REMOVAL [10/2015 - ]

  2. REMOVE KNOCK SENSOR 
    1. Detach the 2 wire harness clamps and disconnect the 2 connectors from the 2 knock sensors.
      GTY589684Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and 2 knock sensors.
      GTY589683Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals