Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2015 >> GS 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Control System - Service Information) >> Engine Coolant Temperature Sensor >> Removal [10/2015 - ] >> Procedure

Removal [10/2015 - ]: Procedure

WARNING: This page is about a different car, the 2020 Lexus GS 350, 2019 Lexus GS 350, 2018 Lexus GS 350, 2017 Lexus GS 350, and 2016 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL [10/2015 - ]

  2. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the connector from the engine coolant temperature sensor.
    2. Remove the clip and engine coolant temperature sensor.
      GTY658592Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals