Installation [09/2014 - 10/2015]: Procedure

1. Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *1

   O-Ring

2. Install the oil control valve with the bolt.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   NOTE:

   • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (the surface that contacts the cylinder head cover).
   • Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.
3. Connect the camshaft timing oil control valve connector.

1. Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *1

   O-Ring

2. Install the oil control valve with the bolt.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   NOTE:

   • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (the surface that contacts the cylinder head cover).
   • Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.
3. Connect the camshaft timing oil control valve connector.
4. Install the bracket with the bolt.

   Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

5. Connect the wiring harness at the bracket.

1. Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *1

   O-Ring

2. Install the oil control valve with the bolt.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   NOTE:

   • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (the surface that contacts the cylinder head cover).
   • Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.
3. Connect the camshaft timing oil control valve connector.
4. Install the V-bank cover bracket with the bolt.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

1. Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *1

   O-Ring

2. Install the oil control valve with the bolt.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   NOTE:

   • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (the surface that contacts the cylinder head cover).
   • Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.
3. Connect the camshaft timing oil control valve connector.

(Refer to INSTALLATION [09/2014 - 10/2015] )