Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2015 >> GS 350 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Level Sensor >> Installation [09/2014 - 10/2015] >> Procedure

Installation [09/2014 - 10/2015]: Procedure

  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install a new gasket to the engine oil level sensor.
    2. Install the engine oil level sensor with the 4 bolts.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

      HINT: 

      Be sure to clean the contact surface.

    3. Connect the engine oil level sensor connector.
  2. ADD ENGINE OIL 

    See step  7

  3. INSPECT FOR OIL LEAK 

    See step  8

  4. INSPECT ENGINE OIL LEVEL 

    Refer to PROCEDURE - Step 2

  5. INSTALL NO. 2 ENGINE UNDER COVER (for 2WD) 

    Refer to PROCEDURE - Step 114

  6. INSTALL FRONT SUSPENSION MEMBER BRACE (for 2WD) 

    Refer to PROCEDURE - Step 115

scientia non olet · About Mike's Workshop Manuals