Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2014 >> IS F >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Engine Oil Temperature Sensor >> Inspection [09/2013 - ] >> Inspection [09/2013 - ]

Inspection [09/2013 - ]

  1. INSPECT OIL TEMPERATURE SENSOR 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Oil Temperature Sensor
      GTY120889Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 25°C (77°F) 8.70 to 11.30 kΩ
      1 - 2 80°C (176°F) 1.529 to 1.869 kΩ

      If the result is not as specified, replace the sensor.

      NOTE: When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.
scientia non olet · About Mike's Workshop Manuals