DTC 43: ABS Control System Malfunction [09/2013 - ]: Procedure
- CHECK ANTI-LOCK BRAKE SYSTEM
- Clear the DTCs. Refer to DTC CHECK / CLEAR [09/2013 - ] .
- Turn the engine switch off.
- Check if an ABS DTC is output. Refer to DTC CHECK / CLEAR [09/2013 - ]
.RESULT
Result Proceed to DTC is not output A DTC is output B
B → See step 4
A: Go to next step
- CONFIRM DTC
- Clear the DTCs. Refer to DTC CHECK / CLEAR [09/2013 - ] .
- Turn the engine switch off.
- Check if the same DTC is output. Refer to DTC CHECK / CLEAR [09/2013 - ]
.RESULT
Result Proceed to DTC is not output A DTC is output B
B → See step 5
A → See step 3
- CHECK FOR INTERMITTENT PROBLEMS. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2013 - ]
- REPAIR CIRCUITS INDICATED BY OUTPUT DTCS. Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2013 - ]
- REPLACE BRAKE ACTUATOR ASSEMBLY. Refer to REMOVAL [09/2013 - ]