DTC C1A10: Front Radar Sensor: Procedure

REPLACE FRONT MILLIMETER WAVE RADAR SENSOR
1. Replace the front millimeter wave radar sensor. Refer to REMOVAL [09/2012 - ] .
NEXT: Go to next step
ADJUST FRONT MILLIMETER WAVE RADAR SENSOR
1. Adjust the front millimeter wave radar sensor. Refer to ADJUSTMENT [09/2012 - ] .
NEXT: Go to next step
CHECK FOR DTC
1. Clear the DTCs. Refer to DTC CHECK / CLEAR [09/2012 - ] .
2. Check for DTCs. Refer to DTC CHECK / CLEAR [09/2012 - ] .
  OK
  
  DTC C1A10 is not output.
NG → See step 4

OK → END (FRONT MILLIMETER WAVE RADAR SENSOR IS DEFECTIVE)
REPLACE DRIVING SUPPORT ECU. Refer to REMOVAL [09/2012 - ]